The short version (for the “just tell me” crowd)
Cryolipolysis—aka fat freezing—cools stubborn fat to a precise low temperature. Fat cells are more sensitive to cold than skin, nerves, or muscle, so they crystallize, shut down, and are gradually cleared by the body over a few weeks. Good machines make this controlled, even, and safe. Great machines make it efficient for your clinic, too.
Why cold works on fat (the science in plain English)
Selective chill: Fat cells (adipocytes) have a higher fat content and different membrane behavior, so they’re the first to tap out when temperatures drop.
Apoptosis, not “instant melting”: You’re not popping fat cells on the spot—you’re triggering a tidy “retire and recycle” process. The lymphatic system quietly clears them over time.
Precision matters: Uniform cooling, smart sensors, and gentle vacuum suction help reach the target temperature without harming surrounding tissue.
What happens during a session?
Prep & membrane: The area is measured and a gel anti-freeze membrane is applied to protect skin.
Chân không + seal: An applicator draws the tissue into a cooling cup for close contact and stable temperature.
Pre-heat (in some systems): A brief warm-up (around 37–45 °C) promotes blood flow, then the device transitions to deep cooling.
Controlled cooling: The applicator holds the tissue at a precisely low temperature (often down to around −15 °C, depending on the system).
Post-care: Light massage, hydrat hóa, and optional lymphatic drainage help comfort and circulation.
What clients feel: initial tugging from vacuum, then intense cold that typically numbs within minutes. Most nap, scroll, or answer emails.
When results show: subtle changes from week 3–4, with peak contouring around week 8–12.
Why 360° cooling is a big deal
Traditional applicators cool from two side plates—effective, but the “edges” may run warmer. 360° applicators wrap the tissue with cold, so the entire captured area gets even treatment. Upsides:
More uniform fat reduction per session
Shorter total treatment plans for the same area
Happier before/after photos
Picking the right system (clinic owner’s cheat sheet)
Throughput: Treat more areas at once to keep your schedule flowing.
Coverage uniformity: 360° cups = fewer “missed” zones and smoother results.
Temperature intelligence: Real-time sensors guard against over- or under-cooling.
Ergonomics: Applicator sizes should match bellies, flanks, Vũ khí, đùi, sub-chin, etc.
Add-on tech: EMS or mechanical micro-vibration can boost circulation, Giai điệu, and client satisfaction.
The SHEFMON cryo family (all internal links)
1) All-rounder clinic workhorse
S9 360 Weight Loss Fat Freezing Machine
True 360° silicone cups for uniform cooling and comfort
Cooling range typically down to −15 °C (1–5 gears), smart pre-heat (37–45 °C)
10.4″ touchscreen, 1000 W output, vacuum 10–80 kPa
Standard 5 applicators (max 7): mix sizes to cover abdomen, flanks, đùi, Vũ khí, sub-chin
Safety-first: multiple internal sensors and automated self-checks
Best for: clinics that want a flagship cryo system with top-tier consistency, multi-area flexibility, and fast staff training.
2) Cầm tay, two-handle efficiency
S10 Criolipolisis Portatil Slimming Machine
Compact body with two handles for back-to-back use
360° all-around cooling; minimum temp can reach about −18 °C
Great for: mobile aesthetics, boutique studios, and clinics adding cryo alongside other services.
3) Cryo + EMS = contour + Giai điệu
S26 – CryoEMS Coolsculpting Cryolipolysis + Ems
Kết hợp Cryolipolysis với Kích thích cơ điện
Two cooling handpieces + six cooling plates with EMS contact points
Plates can warm to ~36 °C hoặc cool to ~−4 °C for dynamic protocols
Treats up to 8 body areas simultaneously
Perfect for: high-throughput studios wanting fat reduction + visible muscle engagement in the same visit.
4) Cryo + mechanical micro-vibration (inner-ball roller)
S25 2 trong 1 cryolipolysis + Inner Ball Roller
Classic 360° cryo plus an inner-ball roller handpiece for compression micro-vibration
Aids circulation, Thoát nước bạch huyết, and visible smoothing of cellulite
800 W, 12.1″ screen; cryo cooling to −15 °C; pre-heat 37–45 °C
Great for: combining fat reduction with skin texture work in one system.
S26 2 trong 1 cryolipolysis + Inner Ball Roller
Similar concept, boosted to 1000 W for clinics that want extra power and pace.
Example treatment playbook (you can adapt per device & client)
Consult: goals, medical history, photos, measurements
Mark & membrane: align applicator with natural fat fold
Warm-then-cool (if available): 3-minute pre-heat → target cooling (VÍ DỤ., −10 to −15 °C)
Khoảng thời gian: commonly 35–60 phút per area (your device presets help here)
Finish: brief massage or inner-ball roller pass (S25/S26) to support lymph flow
Plan: most clients need 1–3 sessions per area, spaced 4–6 weeks apart
Smart add-ons that delight clients
EMS pairing (S26 CryoEMS): Giảm chất béo + visible muscle contraction/tone
Inner-ball roller (S25/S26): circulation, Thoát nước bạch huyết, and cellulite smoothing
Lifestyle handouts: simple water/steps/protein tips to amplify results (clients love bite-size guidance)
Quick compare (which SHEFMON model suits you?)
Max uniformity + safety sensors: S9 360
Cầm tay & budget-friendly 2-handle: S10
Most simultaneous zones + toning: S26 CryoEMS
Texture + drainage combo: S25 2-in-1 or the more powerful S26 2-in-1
Câu hỏi thường gặp (fast, friendly, and honest)
Is cryolipolysis safe?
Yes—when performed with professional systems that use real-time sensors Và uniform 360° cooling (Giống như S9 360). Always follow the presets and training.
How many sessions do clients need?
Often 1–3 per area, cách nhau 4Tuần 6 tuần apart. Pictures and measurements help set expectations.
Does it hurt?
Most clients feel firm suction and intense cold that turns into numbness in a few minutes. Post-treatment tenderness is usually mild and temporary.
What areas can you treat?
Abdomen, flanks, đùi, upper arms, bra/back rolls, sub-chin, and more—choose applicators that fit the fold and size. Các multi-size cups on the S9 360 Và S10 make this easy.
How is 360° cooling different from old plate designs?
360° cups chill the entire captured tissue evenly—less risk of warm corners and more consistent results. See the 360° systems: S9 360, S10.
I want fat reduction Và toning in one appointment. Khả thi?
Yep. That’s exactly what S26 – CryoEMS is built for: cryo cooling plus EMS muscle activation.
What if I also want lymphatic and cellulite work?
Consider S25 2-in-1 hoặc S26 2-in-1—they combine cryo with inner-ball roller micro-vibration for smoothing and drainage.
Where do I buy a motorized cryotherapy machine?
Directly from the product pages here at Sheefmon. Start with the S9 360 for a flagship 360° system, or browse the S10, S26 CryoEMS, S25 2-in-1, hoặc S26 2-in-1 and use Request a Quote.
